Hot Runner Band Heater Sprue Bushing in Runnerless Molding 30x25-45mm With K Thermocouple 110V/220V 250W-550W 1PC
Specially designed for hot runner, it is made of stainless steel material and strict process technology, with various shapes of circular, square, and flat sections, and can be equipped with K-type J or E-type thermocouples.
The hot runner is used for high-temperature heating of injection components in the plastic industry. This product is made of closed stainless steel, effectively preventing leakage and damage, and the temperature is absolutely ideal for the user.
1. Material:Stainless steel
2.Voltage: 110V/220V
3.ID*H:30X25mm 30x30mm 30x35mm 30x40mm 30x45mm
4.Wattage:250-550W
5.Cross section: 3x3mm/4.2x2.2mm/3.5x3.5mm
6.With thermocouple: Yes,K type,(if you need J/E type,please contact us)
7.With Grounding wire:Yes
8.Lead Wire: 1M length
9.Temperature Range:0-500
10.Package:1PC hot runner coil heater according to you choose
Pay attention: Power Allowance-10%~+5%
ID
Height
Voltage
Power
Cross section
3x3mm
Cross section
4.2x2.2mm
Cross section
3.5x3.5mm
Coils
Coils
Coils
30mm
25mm
110V/220V
250W
6 4 5
30mm
110V/220V
300W
7 5 6
35mm
110V/220V
350W
8 6 7
40mm
110V/220V
450W
10
7 8
45mm
110V/220V
550W
11
9 9
Application:
1. Product features: This product has the advantages of easy installation, fast heat transfer, good insulation, and production not limited by models and specifications,long service life and is not easily burnt out
2. Product use:Widely applicable to injection molding machines, vacuum molding machines, drying machines, sheet metal machines, and bottle blowing machines...
Different specifications can be customized according to your requirements!
Installation and Use
01. Before installation, use a multimeter to test whether the heating coil is powered on. If there are no issues with the measurement, then install it. If the measurement is not powered on, please contact wih us.
02. The heating ring must be in close contact with the mold. The tighter the contact, the higher the thermal efficiency and the faster the heating rate.
03.When wiring, make sure to tighten it. After tightening, it is best to forcefully pull down the power cord by hand, otherwise poor contact may cause ignition and tripping
Origin : Mainland China
Type : Electric Water Heater Parts
Product Name : Hot runner coil heater
Material : stainless steel
Inner Diameter : 30mm
Height : 25-45mm
Wire Length : 1M
Power : 250-550W