The Klick Fast Magnetic Central Dock Body Camera Mount provides a secure and flexible way to mount your body worn camera without any permanent installation. Featuring eight magnets, this innovative mount attaches instantly to virtually any garment or vest without sewing, clips, or screws. Simply place the back plate behind your clothing or inside a pocket and the magnetic front plate locks firmly in place, holding your Klick Fast enabled body camera, or accessory with confidence. Ideal for law enforcement, security, and professional use, this magnetic mount delivers strength, convenience, and versatility in one sleek, reliable design. NOTE: This Central Dock mount is more suited to devices and body cameras that have the Klick Fast connector located centrally on the device. Will also work with any camera that has a Klick Fast stud built into the center of the camera. Specifications: Magnet Strength: N42 Weight: 5.3 ounces Dimensions: W 2.95 x D 0.79 x H 3.54 inches Material: Nylon; Neodymium How to use: Attach the camera clip adapter to the back side of your PatrolEyes body camera. Next release the mount locking ring, use the tab located at the bottom of the locking ring and push the tab upwards to release it. Next, remove the Klick Fast Dock by pulling one of the support tabs away from the Dock, then pulling the Dock towards you to release it. Position the back plate of the Delta Clamp inside the garment, ensuring it sits securely. Insert the Klick Fast Dock on the right side of the garment, pushing it into the support tabs on the back plate located under the garment; angling it to one side can make this step easier. Once in place, secure the Klick Fast Dock by folding the locking ring down and pushing until you hear a click, indicating it is securely fastened. Finally, attach your device by sliding the adapter into the mount. Then to release the camera turn it 180 degrees then pull up and out. To re attach simply drop the camera back into the mount until you hear it click in place.