مميزات خاصة

The main chip is CP2102, which generates a virtual serial port after installing the driver
With USB to TTL and USB to serial port functions, it can be used for upgrading USB to TTL electronic products without affecting normal serial communication debugging!
With power indicator, the indicator data reception, data transmission indicator. After the driver is correctly installed, the status indicator will be on, the sending and receiving indicators will flash when communicating, and the higher baud rate, the lower brightness
Interface: USB to TTL, 3.3V (<40mA), 5V, GND, TXD, RXD. Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40
Baud rates is 300 bps to 1.5 Mbps, support for the highest baud rate up to 115200 bps.

وصف

CP2102 USB TO TTL Board
Total Size: 40*14mm
Red PCB Size: 25*14mm
5Pin Wire: 20cm
Weight: 7g
Output Voltage: 3.3V and 5V

Product Description:
1. The main chip is CP2102, which generates a virtual serial port after installing the driver
2. USB power supply, with output interfaces including 3.3V ( 3. With power indicator, the indicator data reception, data transmission indicator. After the driver is correctly installed, the status indicator will be on, the sending and receiving indicators will flash when communicating, and the higher baud rate, the lower brightness.
4. Supports baud rates ranging from 300bps to 1.5Mbps, support for the highest baud rate up to 115200 bps.
5. Communication format support:
1) Support 5, 6, 7, and 8 data bits
2) Support 1, 1.5, and 2 stop bits
3) Parity: none, odd, even, or mark
6. Supports Windows 98SE, 2000, XP, Vista, Window7, Mac OS 9, Mac OS X & Linux 2.40
7. The tandard USB type A male and can be directly connected to a computer's USB port

مرحبًا،

بحث

2 قطعة CP2102 USB إلى TTL مهايئ تسلسلي وحدة تنزيل محول مع 5 دبابيس أسلاك توصيل معزز لـ UART STC 3.3 فولت 5 فولت

مميزات خاصة

وصف

منتجات شبيهه