Speed Control
Soft stop soft start controller forward reverse brake 24v motor speed control 10A
Model: DC24RT10BL
Product Description
1. PULSE WIDTH MODULATION
Motor runs quieter, with greater efficiency and less maintenance, longer life.
2. FOUR QUADRANT REVERSIBLE OPERATION
3. REGENERATIVE BRAKING
No contactors required. No electromechanical components to overheat or wear out.
4. ENABLE / BRAKE / DIRECTION TERMINALS
Choose a function by simply opening or closing a dry contact or through an open collector transistor.
5. Soft start, soft stop time adjustable
6. Forward and reverse can be set separately
7. Output current can be set
8. Braking current can be set
9. compensatio
10. Standard analog control mode: Analog:0-5V or potentiometer
11. Over voltage & less voltage protection
12 OVER TEMPERATURE PROTECTION
Drive will fold the output power back to prevent from overheating Drive will fault if it still remains too
Specification for DC24RT10BL
Input voltage range
DC24V (if you need 12V, 36V, 48V, kindly advise)
Max output current
10A
Operating mode
Speed mode, mode, Four-quatrant mode, Regenerative Bracking
Control ways
PWM, 0-5V, Potentiometer
Protection
Abnormalitise like over current, overheating, over voltage, less voltage and short circuit will start the protection function.
Soft start/stop
Soft start time: 0.2s-20s, soft stop time: 0.2s-20s, can be setted seperately.
Working Temperature
-10 -- +60
Ambient humidity
Relative humidity less than 80RH
Size
L*W*H = 127*75*34 mm
Weight
400g
Product Overview
General Connect Drawing
Function of Control Terminal
1.BRAKE SWITCH
Regenerative braking control: When quick stopping of motor is required, this function is suitable. Close brake switch, motor controller rapidly brakes motor's speed by the way of regenerative braking then make motor stop immediately.
2.INHIBIT SWITCH
Enable control: Control the start and stop of motor
3.FORWARD/REVERSE SWITCH
The reversing control of motor: Rotation direction can be easily get through open or close reversing switch.
Analog Quantity Control
You can control this motor speed by analog quantity signal 0-5V
Instruction and setting of adjustable potentiometer
1. "ACCEL" potentiometer( Set soft start time 0.2s - 20s )
Adjust "ACCEL" potentiometer to set ramp up from initial speed value to setting speed value(it means acceleration time).
2. "DECEL" potentiometer( Set soft stop time 0.2s - 20s )
Adjust "DECEL" potentiometer to set ramp down from Max.speed value to Min.speed value(it means deceleration time).
3. "FWD MAX SP"
Set the MAX forward speed.
4. "REV MAX SP"
Set the MAX reverse speed.
5. "REGEN CL"
Adjust "REGEN CL" potentiometer to limit Max. braking armature current value(it also means brake/stop time). The braking current value affect brake/stop time.
6. "IR COMP"
Adjust "IR COMP" potentiometer to make motor have constant speed value in different load conditions( setting is "0").
7. "MIN SP"
Set the motor MIN speed
8. "MOTOR CL"
Adjust "MOTOR CL"potentiometer to limit motor controller's Max.output current(we also say motor's setting current value).The setting of this current should be based on motor's rated current value.Current value should be moderate.If not, is not enough or overcurrent protection is failure. Adjust this potentiometer in clockwise to increase motor controller's output current.
Note: Motor controller's output current value should be twice as much as motor's rated current value in general.However,motor controller can't operate at setting value which is greater than motor's rated current value for a long time, or the motor will be burnt out.
soft stop soft start controller forward reverse brake 24v motor speed control 10A
Related products
Model
Rated volt/V
Rated current
Max current
Controller mode
Regeneration
DC12/24/48RT10BL
12/24/48
5A
10A
Potentiometer, PWM, 0-5V
Yes
DC12/24/48RT15BL
12/24/48
8A
15A
Potentiometer, PWM, 0-5V
yes
DC12/24/48RT30BL
12/24/48
15A
30A
Potentiometer, PWM, 0-5V
Yes
DC12/24/48RT50BL
12/24/48
25A
50A
Potentiometer, PWM, 0-5V
Yes
DC12/24/48RT100BL
12/24/48
50A
100A
Potentiometer, PWM, 0-5V
Yes
Producing
==========
Model Number : DC24RT10BL
Motor Type : Motor
Votlage : DC24V
Max current : 10A
Continue current : 6A
Control signal : PWM, 0-5V, Potentiometer
Soft start time : 0.2s-20s
Soft stop time : 0.2s-20s
Reversible : yes