Fittings
5pcs Pneumatic Air Quick Connector Pu Hose Fitting Tee Gas Pipe Tube Push in Connectors PEG PE OD 16 14 12 10 8 6 4 4MM 6MM 8MM 10MM 12MM 14MM16MM
PEG Specification:
Item No.: PEG (Union)
Connection Way: One-Touch Quick Connection
Type: Hose to Hose
Design: Tee (Different Diameter)
Material: Nitrile Rubber, Plastic, Metal
Fluid Type: Clean Air, Vacuum, No Toxic Gas
Applicable Tube: SolfNylon, Polyurethane
Normal Operating Pressure: 0~10kgf/cm² (0~1.0MPa / 0~1.0bar)
Max.Operating Pressure: 15.0 bar(1.5MPa)
Negative Pressure: -750mmhg (10Torr)
Ambient And Fluid Temperature: 0~60 (140)
Hose Size Options (mm) : 6-4, 8-4, 8-6, 10-6, 10-8, 12-8, 12-10, 14-10, 14-12, 16-12, 16-14
PE Specification:
Item No.: PE (Union)
Connection Way: One-Touch Quick Connection
Type: Hose to Hose
Design: Tee
Material: Nitrile Rubber, Plastic, Metal
Fluid Type: Clean Air, Vacuum, No Toxic Gas
Applicable Tube: SolfNylon, Polyurethane
Normal Operating Pressure: 0~10kgf/cm² (0~1.0MPa / 0~1.0bar)
Max.Operating Pressure: 15.0 bar (1.5MPa)
Negative Pressure: -750mmhg (10Torr)
Ambient And Fluid Temperature: 0~60 (140)
Hose Size Options (mm) : 4-4, 6-6, 8-8, 10-10, 12-12, 14-14, 16-16
Installation Instructions:
Installation
Grasp the tubing and slowly push it into the fitting until it comes to stop.
The tubing will be locked by the spring gasket.
Remove
Push the release button to open the spring gasket so that the tubing can be released.
Cautions:1. Cleaning: Clean the piping before connection to remove debris.
2. Tubing Cut: Ensure a perpendicular cut without scratches on the tubing's outer diameter.
3. Pipe Length: Avoid excessive bending; select a proper pipe length.
4. Connection: After connecting, pull the tubing gently to check its seal.
5. Release: Push evenly on the release button flange for proper tubing withdrawal.
6. Removal: