Fittings
10pcs Pneumatic Air Connector Compressor Pump Hose Tube Fitting Fittings Set Pipe Quick Connectors Adapter Kit 8mm 6mm 4mm 12mm
Packing: 10pcs/lotSpecification:
Item No.: PU / PV / PE(PT) / PY / PZA(ZA/PZ) / PK / PM / HVFF / SA(PA/LSA) / PP
Connection Way: One-Touch / Push in Quick Connection
Type: Hose to Hose
Design: Union /Elbow /Tee-Tpye /Y-Tpye /Cross /Triple Branch /Bulkhead /Hand Valve /Speed Adjusting /Plug
Material: Nitrile Rubber, Plasticn , Metal
Fluid Type: Clean Air, Vacuum, No Toxic Gas
Applicable Hose: SolfNylon, Polyurethane
Normal Operating Pressure: 0~10kgf/cm² (0~1.0MPa / 0~1.0bar)
Max.Operating Pressure: 15.0 bar(1.5MPa)
Negative Pressure: -750mmhg (10Torr)
Ambient And Fluid Temperature: 0~60 (140)
Hose Size Options: 4-4mm, 6-6mm, 8-8mm, 10-10mm, 12-12mm
PU /Union
PV /Elbow
PE /Tee-Tpye
PY /Y-Tpye
PZA /Cross
PK /Triple Branch
PM /Bulkhead
HVFF /Hand Valve
SA /Speed Adjusting
PP /Plug
Installation Instructions
Installation
Grasp the tubing and slowly push it into the fitting until it comes to stop. The tubing will be locked by the spring gasket.
Remove
Push the release button to open the spring gasket so that the tubing can be released.
Cautions:
1. Cleaning: Clean the piping before connection to remove debris.
2. Tubing Cut: Ensure a perpendicular cut without scratches on the tubing's outer diameter.
3. Pipe Length: Avoid excessive bending; select a proper pipe length.
4. Connection: After connecting, pull the tubing gently to check its seal.
5. Release: Push evenly on the release button flange for proper tubing withdrawal.
6. Removal: Avoid rotating the tubing fully during removal.
7. Assembly: Ensure no debris enters when screwing pipes and fittings together.
Safety Instructions:
1. Pressure: Ensure zero pressure in the tubing before removal.
2. Spatter Zones: Avoid standard fit