70-78 GM F-body ( ) Front & Rear 3 piece, Stainless Braided Brake Hose Set. This is a 3 piece hose set for factory Disc Brakes and Single piston Calipers - Just as the car came from the factory. will also all aftermarket single piston calipers. These hoses have the correct fittings on the ends the fronts are the common 3/8-24 Female to connect to the brake lines and the front the caliper is the 7-16-20 which is the same on all gm calipers from 1969-78 (If for some reason you have a 1978 and newer caliper they will have the 10mm inlet and these will not work). The rear hose has the brass tee for the 3/16 axle lines and the other end is the 1/4" fitting for the front to rear brake line. These are Inline Tube Stainless Braided hoses. This Stainless Braided Hose has a DOT Plastic Covering so that meets DOT standards and provides a covering to the hose so that if gets dirty can be wiped clean. Frame Brackets: These hoses all the stock Front & Rear Frame Brackets Since the end fitting on the stock hose was shape or oval or hex may be necessary to hand file the hole of the frame bracket for a perfect . The new stainless hose will have a round end on . These are made to the same specification as the original rubber hose but is stainless braided. is a direct replacement. They are the correct length and have the correct end fitting sizes so they will screw right into the factory stock components as a direct replacement. These are Inline tube - Power Braid - Brand Hoses - MADE IN THE USA. They feature a clear hose covering that will prevent grease, dirt and oil from getting onto the braid hose. Simply wipe clean and they look like new again. This clear covering adds DOT strength the ends and will not yellow. This is the latest technology in Stainless Braided Hoses. These will also increase stopping power since they do not expand like a stock rubber hose.