Overview
Pre-soldered Pico 2 W is a low-cost, high-performance microcontroller board with flexible digital interfaces. Upgraded hardware from Pico 2 with wireless communication, onboard antenna, features 2.4GHz 802.11n WIFI and Bluetooth 5.2.

Features
--RP2350 microcontroller chip designed by Raspberry Pi in the United Kingdom
--Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz
--Onboard CYW43439 wireless chip, supports WIFI 4 wireless and Bluetooth 5.2
--520KB of Static Random-Access Memory, and 4MB of on-board Flash memory
--Castellated module allows soldering direct to carrier boards
--USB 1.1 with device and host support
--Low-power sleep and dormant modes
--Drag-and-drop programming using mass storage over USB
--26 × multi-function GPIO pins
--2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
--Temperature sensor
--12 × Programmable I/O (PIO) state machines for custom peripheral support

Package Content
Pico 2 W with pre-soldered header (mono) x1
1*3PIN yellow pin header x1
USB-A to micro USB cable ~1.2m x1

NOTE: Online Development Resources and Technical Support are provided, please feel free to contact us if you have any problem!