This kit includes the Conductonaut Extreme Thermal Compund (1g), Kapton Insulation Sheet and the TG-Remove (10mL) The Conductonaut Extreme liquid metal thermal compound is the further development of Conductonaut and was developed for applications with maximum power density. As a gallium-based liquid metal, Conductonaut Extreme is a metallic alloy that is liquid at room temperature, allowing for the minimum possible layer thickness. Conductonaut Extreme thermal paste is technically not a thermal paste, as a paste consists of liquid and solid particles. The disadvantage of a paste is the solid particles. The surfaces of the base plate of the CPU cooler and the CPU heat spreader are uneven on a microscopic level. Kapton Insulation Sheet is an assembly aid for electrically conductive thermal interface material (TIM). It is ideal for masking components such as SMDs on a CPU or GPU if they are to be used with Conductonaut liquid metal, Carbonaut or KryoSheet. Kapton Insulation Sheet is a polyamide film that can be used at high temperatures up to 280 degrees Celsius and acts as an assembly aid for electrically conductive thermal interface material (TIM). It is ideal for covering components such as SMDs on a CPU or GPU if they are to be used with Conductonaut liquid metal, Carbonaut or KryoSheet. Kapton Insulation Sheet is supplied packaged in 10 sheets of 5 Kapton adhesive strips each. Each individual adhesive strip is 10 mm wide and 60 mm long, with a thickness of 40 µm. Scope of delivery 10x carrier foil with 5 Kapton Insulation Sheets each TG Remove is an acetone based nano-cleaner for the best cleaning results of thermal paste. In addition TG Remove has a degreasing effect which helps preparing the surface for new application e. g. on CPUs. The degreasing effect helps to prepare the surface for best liquid metal application. Model: TR-99111-99041-99056