Compatibility Notes:
1. This is for basic radios only, not fit for like Bose Monsoon etc premium sound systems
2. The audio volume of the amplifier can be adjusted through the dial on the wiring harness.
3. After installation, the "bass level" can only be controlled by the EQ on the radio. Add an Amp Amplifier Adapter
COMPATIBLE WITH:

Fits for GM Vehicles Chevy Camaro Colorado
fits for GMC Canyon 2015- 2018
fits for Sierra 1500 Limited, 2500 HD, 3500 HD 2019
fits for Sierra 1500, 2500 HD,
fits for 3500 HD 2015- 2018
fits for Sierra 1500, 2500 HD,
fits for 3500 HD 2015 -2017
fits for Sierra 1500 2014Yukon Yukon XL 2015 -2020
fits for Yukon Denali
fits for Yukon XL Denali 2015- 2020.
fits for Chevrolet Camaro 2016- 2018
fits for Colorado 2015- 2018
fits for Equinox 2018 fits for Malibu 2016-2018
fits for Silverado 1500 LD
fits for 2500 HD
fits for 3500 HD 2019
fits for Silverado 1500, 2500 HD
fits for 3500 HD 2015-2018
fits for Silverado 1500 2014
fits for Suburban 2015-2020
fits for Tahoe 2015 -2020,
fits for Trax 2017.

Provide the connection for a set of RCA cables provide audio signals to an external amplifier. Replace Part Number: 71-2107

Package Including:
1x wire harness
Add an Amp Amplifier Adapter Easy installation:
1. Remove your factory radio and slowly take the radio out.
2. Unplug the factory wiring harness and insert this amplifier wiring harness in the middle between the radio and the wiring harness.
3. Then connect the RCA cables to the white and red sockets.
4. Reinstall your factory radio.

Converter adjustment instructions:
1. After all necessary connections are made, turn the adjustment pot fully counter-clockwise to turn it fully down.
2. Turn on the stereo and adjust the stereo master volume control to approximately 3/4 of maximum volume.
3. Select one of the adjustment knobs, turn slowly clockwise until you notice audio distortion, then stop.
4. Turn the remaining pot to the same position as the previously adjusted pot.