Specifications:
Brand: CC3D
Color: Black
Wire diameter: 1.75mm
Net weight: 1.0 kg

Print Settings:
Printing temperature: 225±15℃
Printing speed: 30~60mm/s
Cooling fan: Turn off
Bed temperature: heat to about 60°C

Material Characteristics:
PBT filament is made of PBT and glass fiber composite with special polymerization modification.
The toughness of PBT is about 6 times that of PLA, the flexural modulus of the PBT filament is about 800MPa.
The filament has a low printing temperature, which is close to that of PLA.
The heat-resistant temperature of the printed products can reach about 130 °C under the condition of no force.
Printed products can be used as structural parts, without electrical insulation, and are not resistant to voltage.
Be sure to use a stainless steel nozzle, otherwise the nozzle will be seriously worn.
The surface of the wire is frosted.

What is Polybutylene Terephthalate (PBT)?
Polybutylene Terephthalate (PBT) is a semi-crystalline engineering thermoplastic material. It has similar properties and composition to polyethylene terephthalate (PET).
It is a member of the polyester family of polymers. PBT has gained commercial interest due to its wide range of applications. These range from automotive, electrical and electronics, medical, and many more.