Replacement Part Numbers:
Product Part #: 3164659
Screw Assembly Part #: 3164667
Crankshaft Seal Replacer Part #: 3164661
Socket Head Cap Screw Part #: 3164239 (M12 x 1.25 x 60mm)
Sheet Metal Screw Part #: 3164217(10 X 25.4m, 1 inch long)
Drill Bit Part #: 3164218

How to use this tool properly:
1.Clean and inspect the seal chamber to avoid even a minimum damage that may cause leakage.
2.Fit the threaded spindle of the special tool on the crankshaft flange.
3.Put a new seal over the crankshaft.
4.Screw the push/pull piece onto the threaded spindle up to the seal.
5.Turn the threaded spindle anti-clockwise until the push/pull piece is level with the panel.
The seal has been properly fitted once it is level with the engine top panel.
6.Remove the special tool and inspect the vibration damper.
7.Fit the crankshaft pulley and the vibration damper and tighten the attachment bolts to the specified torque.

Package Includes:
1 x Front Crankshaft Seal Remover & Installer Tool Kit 3164659