Specification
Material: Aluminum
Model: WX-813
Process: Chrome-plating
No-load Speed: 18000rpm
Rated Speed: 20000rpm
Air Consumption: 4.0CFM
Air Pressure: 90PSI
Air Inlet Size: 1/4inch
Each Cutting Blade Diameter: 7.5cm/3in
Grinding Wheel Cover Diameter: 8cm/3.15in
Handle Diameter: 3.3cm/1.3in
Product Size(L*H): 31*6cm/12.2*2.36in

Package Included
1* Air Cutting Tool
6* Cutting Blades(One is Installed)
1* Air Inlet
1* Wrench
1* Allen Key
1* Chinese Accessories List

Notes
1.Please don't press hard when cutting, which will cause the grinding disc damage.
2.Please fill with 2-3cc of #60 pneumatic lubricant oil (not included) before use, and let the machine run for a few seconds after oiling before use.
3.Please note that this product requires an air compressor (not included) to be connected in order to work!
4.Please note that if the air pressure is too low, the working efficiency of the tool will be significantly reduced or even unable to work properly. Although high air pressure can improve the efficiency of tools, it can easily damage internal parts and shorten the lifespan of tools.
5.Please install a filter (not included) to remove foreign matter from the air. To provide clean and dry air for the tool, the filter should have enough flow rate and should be cleaned frequently. In addition, the air compressor will accumulate a lot of water after working for a period of time, so please discharge it regularly to ensure the air is dry.
6.For work with hammering transmission (wind cannon, wind wrench, etc.), the hammering components should be inspected regularly every month.