Tolerance of the diameter of the end mill:
D1mm-5mm (-0.010 ~ -0.030)
D6mm-10mm (-0.015 ~ -0.040)
D10mm-20mm (-0.020 ~ -0.050)
*2 fluteend mills are widely used in grooving, casting, etc.*3 flutesfor aluminum.Glossy finish for aluminum*4 grooveshigh rigidity, widely used in shallow slitting, profile milling and finishing machining.
1;AL End Mill:Cu,Al,hard wood,Aluminum Alloy,Copper Alloy
2;45HRC:Processing range HRC 50.Suitable for processing Carbon Steel.Alloy Steel.Cast Iron.
3;55HRC:Processing range HRC 55.Suitable for processing Carbon Steel.Alloy Steel.Cast Iro. Mold Steel. Steel
4;57HRC:Processing range HRC 57.Suitable for processing Carbon Steel.Alloy Steel.Cast Iron.Mold Steel.Steel.
5;58HRC:Processing range HRC 58.Suitable for processing Carbon Steel.Alloy Steel.Cast Iron.
Mold Steel.Steel.Stainless steel.
6;60HRC:Processing range HRC 60.Suitable for processing Carbon Steel.Alloy Steel.Cast Iron. Hardened Steel.Steel.Stainless steel.Suitable for machining
7;62HRC:Processing range HRC 62.Suitable for processing Carbon Steel.Alloy Steel.Cast Iron. Hardened Steel.Suitable for machining
8;63HRC:Processing range HRC 65.Suitable for processing Carbon Steel.Alloy Steel.Cast Iron. Hardened Steel.Stainless Steel.Suitable for machining
Industrial design:Negative front angle and large chip space. Easier processing of roughing and finishing.
Decrease of cutting times, saving of production time.
Helix angle: 35 degrees, great adaptability to material and hardness of workpieces, widely used for molding and processing products and cost effective.
1:HRC45dark gray.
Density: 14.5g / cm3
Hardness: HRA 91.5
Grain size: 0.8um
Flexural strength: 2800N / mm2
Raw material: YG10X with a Co content of 10% and a particle size of 0.8um.
Coating: ALTiN, high aluminum content offers excellent hot hardness and resistance to oxidation.
2:HRC55Copper color.
Density: 14.5g / cm3
Hardnes