MICROLUBROL SYLCAP 284-S Silicone Elastomer Encapsulant Kit, Transparent, Optically Clear, 10:1 Mix, 100 Gm/ML (0.1 Kg), STANDARD Cure Time, Compare to Sylgard 184 and Similar. Includes everything you need to easily and accurately mix anything between a custom sized small batch to a full 100 grams of silicone elastomer resin. Product features: Transparent / Optically Clear when mixed AND when fully cured. Two-part, 10 to 1 mix ratio. Polydimethylsiloxane (PDMS) silicone based elastomer. Good flow and spreadability when mixed. Compare to Dow Corning brand Sylgard 184. Standard curing time profile similar to DC 184. Resistant to cold and heat (up to 392ºF, 200ºC). Does not yellow or discolor under UV light. Suitabe for room temperature cure OR heat cure. Room Temperature (72ºF to 77ºF) full cure to approximately 45 Shore A hardness in 24-28 hours. Room Temperature (72ºF to 77ºF) 50% cure to approximately 20-25 Shore A hardness in 12-14 hours. Heat cure: Curing time at 212ºF is approximately 30-45 minutes (not including recommended one hour standing time at room temperature prior to heating to allow for entrained air bubbles to disappear if not using vacuum debarring). SYLCAP 284-S STANDARD CURE PROFILE SILICONE ELASTOMER CURING AGENT, 91 Grams in a durable, wide-mouth jar for easy, accurate and down-to-the-last-drop dispensing with syringe, foil heat sealed in jar for protection until used. Accurate graduated mixing cup, with Milliliter (ML) and ounce graduations, reusable. Durable double-ended plastic mixing paddle / spatula, reusable. Convenient, accurate 20 ML capacity syringe for accurate measuring and dispensing of SYLCAP 284-S ELASTOMER BASE for small batch mixes. Vinyl rubber gloves, latex-free (Large size for true comfortable one-size fits all). Detailed, step-by-step mixing and curing instructions. NOTE: For a FASTER CURING product, search in our eBay store for our SYLCAP 284-F FAST CURE Profile Silicone Elastomer which reaches full cure twice as fast in approximately 12 hours and hardens to an already usable 30 Shore A hardness in approximately 6 to 8 hours.