بحث

بحث

بيت / dhumcnnvs / الفرامل والقوابض
قضيب أسطوانة القابض الهيدروليكي الرئيسي 12.7 مم مكبس متوافق مع دراجة نارية موتوكروس (فضي) in Kuwait

أزرق

KWD 13
اللونأزرق
– 1 +

مميزات خاصة

  • Designed for use on most 125cc to 450cc motocross, bike, and off-road motorcycles with hydraulic clutch systems
  • Features a precise 12.7mm piston diameter for consistent pressure delivery and responsive clutch engagement
  • Constructed from aluminum with anodized finish for corrosion resistance in harsh riding conditions
  • Compatible with standard master cylinder mounting patterns and common hydraulic clutch lines used across major motorcycle brands
  • Includes necessary mounting hardware and seals for installation on stock and aftermarket clutch setups

وصف

Universal 12.7mm piston hydraulic clutch master cylinder rod for motorcycle motocross and off-road bikes.Fill the reservoir while the unit is level to minimize air bubbles.Align the tubing with the bleed screw hole without fully tightening; keep the screw-side holes exposed.Connect the pump to the tubing and position the fluid reservoir higher than the pump body.Operate the lever approximately ten times.Allow five to ten minutes for fluid to flow through the system.Once fluid appears at the bleed port, tighten the screw to complete the bleeding process.Package Contents: 1 x Hydraulic Clutch Master Cylinder Rod

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}