Product Description:
Product Name: 3D Printing Coating
Specifications: 12 sets of 150g A + 50g B, 2.5cm sponge brush, 60ml measuring cup, 2 stirring rods
Product Features:
1. Firmly adheres to porous and non-porous surfaces, enhancing the durability and surface texture of various 3D printed parts.
2. Improves the surface smoothness of the model.
3. 3D printing coating.
4. Provides waterproof protection for 3D printed parts.
5. Increases the hardness and impact resistance of 3D printed parts.
6. The set includes 12 sets of 150g A + 50g B, a 2.5cm sponge brush, a 60ml measuring cup, and 2 stirring rods.
How to Use:
1. Turn on the electronic scale, place the measuring cup on the scale, and press the zero/tare button.
2. Mix the glue: Pour the glue in a ratio of A:B = 3:1 (e.g., 60g of A glue, 20g of B glue). 1. Pour in Glue A first, zero the scale, then pour in Glue B to ensure accurate mixing.
3. Apply the coating: Use a 2.5cm sponge brush to apply a thin layer of the mixed glue to the surface of the printed part. Each coat should not exceed 2 mm in thickness to avoid buildup.
4. Allow to cure: Let the coated model stand for 24 hours to allow it to fully cure.
Precautions:
1. Conduct small-scale testing on the project materials to determine their suitability and compatibility.
2. The model needs to stand for 24 hours after coating to allow it to fully cure and ensure the product functions effectively.
3. Avoid contact with eyes and prolonged skin contact.
4. Use in a well-ventilated area.
5. Keep out of reach of children.