Wide Compatibility: Wideband Air Fuel Gauge has a 52mm (2-1/16") gauge housing, this digital wideband gauge will fit easily in most instrument bays. Equipped with 0-5V and RS232 outputs for compatibility with a wide range of data loggers and engine management systems, it accommodates vehicle/system voltages up to 16V with OBDII connectivity. Compatible with a wide range of tuning software programs including DiabloSport, EFILive, HPTuners and DashDaq. Ensure compatibility based on model for accurate fitment
Multi-Mode Display Functionality: Wideband o2 sensor kit with digital LED display and LED needle, changes color as the AFR goes from rich to lean, the afr meter can be switched at will between 3 display modes of air/fuel ratio, lambda, oxygen percentage, in this way you can monitor the condition of your vehicle effectively but quickly
Durable Carbon Fiber Construction: The instrument is made of special materials with a carbon fiber housing, which is both beautiful and protective. Using a wideband air/fuel controller during the tuning process allows the AFR to be monitored and the tuning parameters to be adjusted to optimize it for maximum power and efficiency
Dual Calibration Mode Options: Resistor Trim Mode (RCAL) or Free Air Mode (ACAL), the choice is yours, UEGO sensors are supplied factory calibrated with trim resistors, integrated into the sensor connector, rCAL is the recommended calibration mode for best accuracy, for most users no further action or calibration is required
Simple Installation Process: The broadband meter has a 52mm housing and comes with a bracket and thumb screws for easy plug-and-play mounting to a panel or dashboard. It is recommended to use the included bracket to securely mount the meter to ensure it does not come loose. Installation instructions are included to help you through the installation and wiring procedures. Kindly note that this product is not waterproof and should not be installed where it is exposed to water or snow
وصف
JHACM 30-0334 X-Series Wideband Sensor Controller Gauge 52mm (2-1/16”) with 4.9 LSU Sensor, Wideband O2 Control Sensor Kit, 0-5V and RS232 Outputs Digital AFR Controller Gauge with OBDII Connection