بحث

بحث

بيت / Elite Gear & Axle / قطع غيار
1965-1972 يناسب تشيفي 12 بولت GM 8.875 بوصة سيارة خلفية صلبة ترس فاصل سحق كم مزيل in Kuwait

1965-1972 يناسب تشيفي 12 بولت GM 8.875 بوصة سيارة خلفية صلبة ترس فاصل سحق كم مزيل

KWD 17.500
– 1 +

مميزات خاصة

  • RSK CSGM12P
  • Fits Chevy 12 Bolt CAR Rearend (1965-1972 Model Years) (12 Bolt Rear Cover)
  • New high quality solid spacer kit used to adjust pinion bearing preload. Replaces crush sleeve.
  • SOLID SPACER INSTALLATION INSTRUCTIONS: 1. Measure the used Crush Sleeve that was originally in the housing. (if not available start with 3 shims) 2. Add enough Shims to the spacer to achieve a total length that is slightly longer than the used Crush Sleeve. 3. Install Spacer and torque the Pinion Nut to 125 foot pounds. At this point pinion pre-load should be loose. 4. Remove the Spacer and Shims. Reduce this Shim Pack in .002 thickness increments and install until the proper bearing pre-load is achieved.

وصف

New high quality solid spacer kit used to adjust pinion bearing preload. Replaces crush sleeve.

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}