مميزات خاصة

Size Information: Our car coil spring spacer can be used for spring spacing of 1.45-1.65 inch, our products are 6.41 inch OD, 4.56 inch ID, and 1.18 inch track height. For accurate spacing measurements, please take off any heavy objects in the car before taking measurements
Noise Reduction and Vibration Damping: The use of our car coil spring spacers significantly reduces the feeling of bumps in the vehicle's ride, smoothing out the body when driving over uneven surfaces, helping to reduce noise and improve ride comfort
High Load-bearing Capacity: Our car coil spring booster can bear about 2500 lbs, after using it, it can raise the body height moderately on the basis of the original car, so that when you face speed bumps and some small obstacles, you can be more relaxed and confident
Flexible Material: TPE is used as the main material of spring spacers for cars, which can still maintain a good structure after long-term pressure, repeated bumps and vibrations during driving, and provide you with stable shock absorption and support effect in a more durable way
Directions for Use: Jack up the vehicle → Thoroughly clean the springs of dirt → Spray bubble water on the car spring spacers grooves and springs → Snap in the spacers → Secure the ties. More detailed instructions for use can be found on the detail page

وصف

COIL SPRING SPACERS FOR CARS, VIBRATION AND NOISE DAMPING FOR A MORE COMFORTABLE RIDE

Product Attributes
Colors: Red
Sizes: 6.41*6.41*2.37 inch
OD: 6.41 inch
ID: 4.56 inch
Track Height: 1.18 inch
Weight: 33.95 oz
Material: TPE
Packaging: Coil Spring Spacer*2, Ties*6
Package Size: 10.93*6.99*2.6 inch

Spring Spacing Measurement Instructions
1. Park the vehicle on a horizontal surface
2. Empty the vehicle of all heavy objects and do not leave people behind

Instructions for Use
1. Choose a flat road surface and jack up the car with a professional jack, the wheels need to be hanging
2. Carefully rinse the surface of the springs
3. Prepare bubble water and spray it carefully on the grooves of the car coil spring spacer and the surface of the spring
4. Snap the top notch of the spacer into the top of the spring, then secure the bottom notch
5. Adjust the position of the gasket and finally fix it with cable ties to complete the installation

Product Functions & Features
1. Car coil spring spacer made of TPE material, compared with ordinary rubber, TPE can still maintain the structural integrity after long-term exposure to huge pressure, frequent extrusion and changes in temperature
2. Our spring spacers for cars also come with ties to provide further tightening

Warm Tip
1. Please measure the size before buy, so as not to receive the size does not fit, causing you trouble
2. Please use a support strong enough to lift the car during installation to avoid exposing you to danger during installation
3. After installation, keep the vehicle chassis is at the same driving height and check that the product is securely installed. After 100 miles (160 kilometers), check the installation of the product to keep it is working properly

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه