The PatrolEyes Klick Fast Delta Molle Dock body camera mount is a secure, stable, and lightweight solution designed for universal molle webbing compatibility. Built with no metal components, it eliminates corrosion, breakage, and jamming, ensuring long-term durability in any environment. Its quick dock and rapid release mechanism make it easy to attach, remove, and reposition body cameras, radios, flashlights, or even pava spray units with ease. Combining strength, flexibility, and simplicity, this dock delivers dependable performance for law enforcement, security, and tactical applications. How to use: Attach the camera clip adapter to the back side of your PatrolEyes body camera. Next The two tabs are slid behind the webbing and then the front plate is locked into place. To release, the tabs are pushed outwards to unhook from the front plate and the Dock can be slid out of the webbing. Finally, attach your device by sliding the adapter into the mount. Then to release the camera turn it 180 degrees then pull up and out. To re attach simply drop the camera back into the mount until you hear it click in place. How to use: Attach the camera clip adapter to the back side of your PatrolEyes body camera. Next release the mount locking ring, use the tab located at the bottom of the locking ring and push the tab upwards to release it. Next, remove the Klick Fast Dock by pulling one of the support tabs away from the Dock, then pulling the Dock towards you to release it. Position the back plate of the Delta Clamp inside the garment, ensuring it sits securely. Insert the Klick Fast Dock on the right side of the garment, pushing it into the support tabs on the back plate located under the garment; angling it to one side can make this step easier. Once in place, secure the Klick Fast Dock by folding the locking ring down and pushing until you hear a click, indicating it is securely fastened. Finally, attach your device by sliding the adapter into the mount. Then to release the camera turn it 180 degrees then pull up and out. To re attach simply drop the camera back into the mount until you hear it click in place.