This Radiomaster AG01 Mini CNC Hall Gimbal Set features both the Self-Centering Gimbal and the Throttle Gimbal. The AG01 Mini is fully CNC milled for ultimate precision with quad ball bearings for a smooth and precise feel. Featuring front-accessible tension and travel adjustment for easy fine-tuning. The AG01 will take your TX12 or Zorro to the next level. From the aviation-grade aluminum construction, non-contact hall sensors, and pre-installed Sticky360 Mini Gimbal Sticks, be prepared to revolutionize your compact radio experience!Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)VIDEO: AG01 gimbals now available for Zorro and TX12 Radiomaster radios!FeaturesNon-contact hall sensors for accurate control inputs and precise centering.Adjustable vertical travel angle (Min. 38°, Max. 54°)Made with CNC-processed aviation-grade aluminum.Quad precision bearings for unparalleled stick feel.Custom designed for RadioMaster Zorro & TX12Sticky360 Mini Gimbal Sticks as standard.INSTALLATION INSTRUCTIONS FOR ZORRO RADIOThe Zorro radio is configured as Mode 1 or Mode 2 by the screws mounted in the rear case of the radio. Both gimbals should be installed in a self-centering configuration (as default out of the box) in the Zorro radio. Once the radio is re-assembled the screws in the rear case of the Zorro will set the throttle gimbal.INSTALLATION INSTRUCTIONS FOR TX12 RADIOOne gimbal must be set as throttle and one as self-centering before installation in the radio.1. Use the included screw (see parts bag) to hold down the centering lever and set the gimbal as a throttle gimbal.2. Adjust the throttle tension bar until the desired tension is achieved.SpecificationsAdjustable Vertical Travel Range: 38°—54°Name: AG01 Mini CNC Hall GimbalTemperature Range: -20°C-85°CSelf-centering adjustment: YesLinearity: Real-time (No delay)Easy mode adjustment: YesWorking voltage: DC 3.3VSensor Type: