Thin Section Ball Bearings are designed for applications where space limitations are critical.As the name suggests, these bearings have a minimized difference between the inner and outer diameters of the rings, resulting in a thinner section.This design allows for compact and lightweight assemblies, though load capacity is reduced compared to standard bearings.Despite this, thin section bearings can support light radial, thrust, or combined loads.The 6832-2RS bearing is a metric thin section ball bearing with double rubber seals (2RS), offering.It has a bore diameter of 160 mm, an outer diameter of 200 mm, and a width of 20 mm.Constructed from 52100 steel, it is pre-lubricated with grease and features ABEC-1 with C0 radial clearance.This type of bearing occupies significantly less space than conventional 6000 series bearings, making it suitable for applications requiring minimal installation space.The small sectional area also contributes to low running torque.Available in various sealing options, including shielded and sealed variants, these bearings offer flexibility in lubrication and mounting methods.The 6700 series, in particular, incorporates low-friction seals to further reduce torque.Series Overview: - 6700 Series: Designed for very limited space and very light loads - 6800 Series: Suitable for limited space and light loads - 63800 Series: Combines the load capacity of the 6800 series with the narrower width of the 6900 series - 6900 Series: For limited space applications with relatively heavier loads