بحث

بحث

بيت / Snapmaker / قطع غيار وملحقات الطابعة ثلاثية الأبعاد
نهاية ساخنة لوحدة البثق المزدوج (مقواة 0.4 مم) in Kuwait

0.8 مللي متر

KWD 22.500
مقاس0.8 ملم
– 1 +

مميزات خاصة

  • Various-sized Hot Ends are optimized for a variety of materials, including ABS, ASA, TPU (Hardness ≥ 90 Shore A), Breakaway PLA, PVA, and HIPS
  • Hardened Hot End is optimized for engineering applications, supporting Nylon, Carbon Fiber Reinforced Nylon, Glass Fiber Reinforced Nylon
  • Can be changed tool-free in a few seconds
  • Luban auto-detects hot end sizes and types and auto-modifies machine settings
  • Refined for consistently high performance across a wide range of materials
  • Compatibility: Snapmaker Artisan Dual Extrusion 3D Printing Module / Snapmaker 2.0 Dual Extrusion 3D Printing Module
  • To make smarter use of nozzles, you can tune your settings a bit more with each nozzle size in Luban. When you want a print with impeccable details, print the shell at a lower speed with the 0.2 mm-nozzle hot end, so it's not only sturdy but looks fine on the outside. And when you want speed for a model that's rich in support structure, print the infill with 0.6 or 0.8 mm-nozzle hot end, because they are way quicker.

وصف

Hardened 0.4mm Hot End for Snapmaker Dual Extrusion Module

منتجات شبيهه

{"error":"\u062e\u0637\u0623","cart_limit":"\u0644\u062f\u064a\u0643 \u0627\u0644\u0643\u062b\u064a\u0631 \u0645\u0646 \u0627\u0644\u0645\u0646\u062a\u062c\u0627\u062a \u0641\u064a \u0633\u0644\u0629 \u0627\u0644\u062a\u0633\u0648\u0642 \u0627\u0644\u062e\u0627\u0635\u0629 \u0628\u0643.","prod_limit":"\u0644\u0627 \u064a\u0645\u0643\u0646\u0643 \u0625\u0636\u0627\u0641\u0629 \u0627\u0644\u0645\u0632\u064a\u062f \u0645\u0646 \u0647\u0630\u0627 \u0627\u0644\u0645\u0646\u062a\u062c"}