Upgrade Your Trailer's Support System The Wellmax 10" Heavy Duty Boat Trailer Bunk Brackets provide the extra clearance and adjustability required for medium to large vessels. Whether you are rebuilding a worn-out trailer or upgrading to support a deep-V hull, this kit delivers superior structural integrity and precise fitment. Maximum Adjustability for Deep-V Hulls Standard 8-inch brackets often lack the travel needed for offshore center consoles and deep-V fishing boats. The extended 10-inch vertical profile allows bunks to be raised higher above the crossmember, compensating for tall trailer frames or complex suspension geometry. The included swivel tops articulate to match the exact deadrise of your hull, ensuring 2x6 bunk boards lay flat for optimal weight distribution. Extreme Saltwater Durability Corrosion is the enemy of trailer hardware. We engineered these brackets with a dual-defense system against the elements. The main galvanized steel bodies receive an additional dacromet coating, while the U-bolts, nuts, and washers feature a Dacromet dip-spin coating. Tested to withstand 1,000 hours of salt spray, this hardware resists seizing, rusting, and degradation in heavy marine environments. What's Included (4) 10" Galvanized & Dacromet Coated Vertical Brackets (4) Dacromet Coated Swivel Top Brackets (4) Dacromet Coated U-Bolts All necessary Dacromet coated nuts, screws, and washers Specs at a Glance Material: Galvanized Steel + Dacromet Coating and Dacromet Hardware Vertical Adjustment Travel: 10 Inches Crossmember Compatibility: 3"x3", 2"x3", 1.5"x3" Recommended Bunk Board Size: 2"x6" Salt Spray Resistance: 1,000 Hours