★ SKULL GRAPHIC STICKER ★

PACKAGE INCLUDES: 2pcs car decals.

SPECIFICATIONS:

Application: Universal for all cars, suvs, trucks, motorcycle etc.

Material: Premium PVC material.

Size: 11 x 11.8 inch (28*30cm)-universal model.

Available Colors: Black/White/ Gradient/ Red/ Yellow/ Blue.

Application: For car body or any other all clean and flat surfaces.

♥ INSTALLATION STEPS ♥:

☞First, distinguish the three different sides of the sticker, the bottom paper, the sticker layer, and the transfer membrane. The bottom paper is the first to be torn off, and there is no stickiness on both sides.You can identify which side is the bottom paper by hand before installation.

---①--- Make sure where you want to paste and clean it out.

---②--- Removing the bottom paper of the sticker, spray water on the side of the sticker with glue to reduce the viscosity, which is convenient for adjusting the position and removing bubbles.

---③--- After sticking the sticker on the car body, lift the sticker on one side and scrape it slowly and gently from the other side with the card, while scraping the bubbles while adjusting the position of the sticker until the entire sticker is scraped.

---④--- Scrape off water and air bubbles with squeegee.

---⑤--- After scraping off the air bubbles, wait for the water in the sticker to dry, peel off the transparent transfer film carefully.(See description or video)

---⑥--- The extra stickers at the door and the seam can be cut off with a knife.

TIPS:

▶1-- Do not wax the car one week before using the sticker. The wax will make the sticker not sticky.

▶2-- Do not wash your car within one week after filming. It is best not to expose it to exposure within 24 hours.

▶3--Due to manual measurement, please allow a deviation of 1-3 mm.