Remark: Does not fit HI-OUTPUT engines. The Rod Bearings in this kit come WITHOUT locating tangs. The locating tangs are not required for installation. Hence, rod bearings without locating tangs will also work on engines that previously use rod bearings with locating tangs.

This item includes:
Full Gasket Set (Multiple Layers Steel (MLS) Head Gasket, Valve Cover Gasket, Valve Stem Seals, Intake Manifold Gasket, ..., Other Small Gaskets, RTV Silicone)
28 Cylinder Head Bolts (20 Long Bolts, 8 Short Bolts)
8 Pistons with Complete Ring Set (standard size)
Standard Bore Diameter: 93.00mm
1st Group: 1.50mm
2nd Group: 1.50mm
Oil Ring: 3.00mm
8 Piston Wrist Pins
16 Cir Clips
Main Bearing Set (Standard Size)
Rod Bearing Set (Standard Size)
Thrust Washer
1 Cam Sprocket Right-Hand Side
1 Cam Sprocket Left-Hand Side
1 Crank Sprocket
1 Idler Sprocket Primary
1 Idler Sprocket Secondary
1 Timing Chain Primary (70 Link)
1 Timing Chain Secondary (2 required 106 Link)
1 Tensioner Primary
1 Tensioner Right-Hand Secondary
1 Tensioner Left-Hand Secondary
2 Guide Secondary (2 required)
2 Tensioner Arm Secondary (2 required)
Water Pump w/ Gasket
Oil Pump
16 Lifters / Lash Adjusters